Web Catalogue update October 2019

MULTI PURPOSE GREASE I/II 04 2501 Graphite grease with Molybdenum and Lithium for high pressure resistance. • Added graphite and MoS 2 . • Gives outstanding properties during emergency running. • EP additives. • Provides high pressure resistance. • Resists oxidation and is work-stable. • Provides a good seal and corrosion protection. • Highly repellent to dust, dirt and water. • Temperature range -30 o C to +130 o C. • Contains no silicone or resins. • Comes in convenient “pull-top cartridge”. Notes: Lubricants are supplied in plastic cartridges. The plastic cartridges improve the storability (leaking of lubricant at high temperatures is prevented). Store cartridges upright in a cool and dry place. The working instructions provided by the manufacturers of the vehicles, machines and units must be complied with. Area of Application: For use on heavily loaded roller bearings, plain bearings and ball bearings, shafts, hinges, spindles, slide bearings and guides, drive shafts etc. Description Contents Art. No. Pack Qty. Multi Purpose Grease I 400g 0893 870 1 1/12 Multi Purpose Grease II 400g 0893 871 1 Partner Product: Grease Gun NZ. pub. 10/14 © MWF - 10/10 - 06696 - © MULTI -PURPOSE GREASE I MULTI -PURPOSE GREASE II LONG- LIFE GREASE III Additional articles: Manual Lever Grease Gun Art. No. 0986 00 Metal Feed Piece Art. No. 0986 001 Reinforced Rubber Hose Art. No. 0986 002 Replacement Mouth Piece Art. No. 0986 003 (M 10 x 1) Lithium-soap universal lubricating grease based on mineral oil • Stable against working and oxidation-resistant. • Excellent sealing, dust- and dirt-repellent. • Good adhesive properties. • Silicone- and resin-free. • In a practical “pull-ō” cartridge. Lithium-soap, high pressure-resistant graphite grease with EP additives • Highly pressure-resistant thanks to EP additive. • Excellent running properties thanks to graphite. • Good sealing ēect and corrosion resistance. • Very good dust-repellent, dirt- repellent and water-repellent properties. • Silicone- and resin-free. • In a practical “pull-ō” cartridge. Lithium-soap multipurpose grease with EP additives for high loads • For long lubrication intervals. • Highly pressure-resistant thanks to EP addi- tives. • Good sealing ēect and waterresistance. • Oxidation- and corrosion-resistant. • Heavy metal- and chlorine-free. • Silicone- and resin-free. • In a practical “pull-ō” cartridge. Designation Contents Art. No. P.Qty. Multi-Purpose Grease I 400 g 0893 870 1 1/12 Multi-Purpose Grease II 400 g 0893 871 1 1/12 Long-Life Grease III 400 g 0890 402 1/12 Multi-Purpose Grease I, Multi-Purpose Grease II, Long-Life Grease III, 0893 870 1 0893 871 1 0890 402 Applications Soap base Lithium 12 hydroxystearate Lithium 12 hydroxystearate Lithium 12 hydroxystearate Color yellow gray-black light brown NLGI class (DIN 51818) 2 2 2 Temperature range –30°C to +130°C –30°C to +130°C –30°C to +130°C Base oil viscosity at 40°C 130 mm 2 /s 60 mm 2 /s 280 mm 2 /s Drop point (DIN ISO 2176) 180°C 190°C 180°C Worked penetration (DIN ISO 2137) 280 280 280 Corrosion protection (SKF Emcor Test, DIN 51802) 0 0 0 VKA welding load (51350) 1,800 N 2,400 N 2,600 N Designation pursuant to DIN 51502 K 2K-30 KPF 2K-30 KP 2K-30 For light-load vehicle and machine components, such as antifriction and slide bearings, shafts, spindles, electrical motor bearings, ball and roller bearings, chassis etc. For average- and heavy- load antifriction, slide, ball and roller bearings, shafts, rotary joints and assemblies, sliding rails and guides, splined shafts, joint rods, hinges, hydraulic units etc. For heavy-load roller and ball bearings in industry and agriculture. Also for working and support rollers of all roller frames, hot and cold shear bearings, hinged blocks and spindles. Also suited toward cutting hammers and presses. Note: Greases are delivered in plastic cartridges! The plastic cartridges improve storage (they prevent the grease from oozing out in high-temperature conditions). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed! For further information, see the technical information sheet.