Web Catalogue update October 2019

CUT + COOL COOLING LUBRICANT ULTRA Universal, cooling lubricant for all turning, grinding and drilling machines, as well as machining centres. • Outstanding rinsing effect. • Excellent cooling effect. • Provides very good discharge of chips. • Cleans surfaces of machines, tools and workpieces. • Good lubricating performance. • High cutting performance. • Reduction of heat due to less friction. • Increase in machining speed possible. • High corrosion protection. • Protection of workpieces, tools and system parts already effective at low concentrations. • High protection against bacteria. • Emulsion does not become contaminated as quickly. • Lower disposal costs. • High economy. • Low foaming characteristics. Applications: Cooling lubricant contains mineral oil and is mixable with water for all turning, grinding and drilling machines, as well as machining centres. For general machining operation and also suited for grinding. High-quality raw materials and additives allows for use with a broad range of materials. Note: Free of chlorine, sulphur, phosphor, silicone, acid and resin. 2-component machine paint is not attacked. Always add concentrate to water and not vice versa! 04 2008 Description/Container Contents Art. No. Pack Qty. Container 5L 0893 050 030 1 Tap for 5L container - 0891 302 01 1 Use: Mixing % Addition % Drilling, Turning, Sawing, Parting 4 - 5 1 - 4 Milling, Thread Tapping, Reaming 4 - 8 2 - 5 Grinding 3 - 4 1 - 3 Use concentrations in %; refractometer factor 1.2 NZ. pub. 10/14 ©