Web Catalogue update October 2019

MULTI-PURPOSE GREASE III/IV 04 2505 Can be used in areas in which food is processed or stored. NSF H1 1 In this context, the product may come into contact with foodstuffs for technical reasons. Multi-Purpose Grease III physiologically safe, colourless grease with multi- functional additive combination. • Good adhesive properties. • Stable against working and oxidation- resistant. • Supports the quality of the seal. • Dust and water-repellent. • Resin, acid and silicone-free. NSF H1 registered (No: 135924), corresponds to the requirements of USDA 1998 H1. Multi-Purpose Grease IV - Synthetic high-performance grease with white solid lubricants. • High-pressure resistant through EP additive. • Very good anti-seizing properties. • Good sealing and good corrosion protection. • Very good dust-, dirt- and water-repellent properties. • Resin-, acid- and silicone-free. NSF H1 registered (No: 135928), corresponds to the requirements of USDA 1998 H1. • Safety product. • Especially user-friendly and safe handling. • Improved workplace safety and health protection. • Free from mandatory warning symbols. 1 NSF = Internationally recognised organisation for the supervision and registration of products used in the food sector. Description Contents in ml Art No. Pack Qty. Multi-Purpose Grease III 400 0893 107 002 1/24 Multi-Purpose Grease IV 400 0893 107 003 Technical Data Multi-Purpose Grease III Art. No. 0893 107 002 Multi-Purpose Grease IV Art. No. 0893 107 003 Applications For the lubrication and care of machines, plain bearings and antifriction bearings, for long-term lubrication in wetrooms and areas as well as in critical areas in the food, pharmaceutical, printing and paper industries. For the lubrication of machines, plain bearings and antifriction bearings, even under extreme conditions such as high temperatures, high pressures, shock and impact stresses and the influence of water. Soap Base Inorganic Al complex Colour Transparent White NLGI Class (DIN 51818) 2 2 Temperature Range –20° to 150°C –45°C to 180°C (for short periods up to 200°C) Basic Oil Viscosity (at 40°C) 100 mm 2 /s 350 mm 2 /s Drop Point (DIN ISO 2176) None > 250 Worked Penetration (DIN ISO 2137) 285 285 Corrosion Protection (SKF Emcor-Test, DIN 51802) 0 VKA Welding Load (DIN 51350) 1800 N 3000 N Designation to DIN 51502 KP2N-20 KPFHC2R-40 This information is only a recommendation based on our experience. Preliminary testing required. Note: Greases are delivered in plastic cartridges. The plastic cartridges improve storage (they prevent the grease from oozing out in high temperature conditions). Store cartridges upright in a cool, dry place. The operating instructions of the vehicle, machinery and aggregate manufacturers must be observed. For further information see the technical information leaflet. Lubricant system Oil    Fat Paste      Dry lubricant Corrosion protection ✓ NZ. pub. 10/14 ©