Web Catalogue update October 2019

HHS LUBE 04 1025 EP long-term sprayed grease with OMC 2 technology. Highly protective effect against weathering and environmental influences. Effects of weathering. • Low dust and dirt adhesion. • Excellently suited for open lubrication outdoors. • Longer life of lubricating grease. • Outstanding insulating properties. • Extended lubricating intervals. • Resistant to salt water and splash water, as well as weak acids and alkaline solutions. • Excellent corrosion protection. • No rinsing off of lubricant. • Oxidation-stable. Environmental influences. • High pressure load of parts to be lubricated. • Extremely pressure-resistant due to addition of EP additives (EP= extreme pressure). • Outstanding noise and vibration damping properties. • Minimises wearing and substance loss of lubricated surfaces. • Improves lubricity due to thermoplastic surface smoothing (OMC 2 technology). • Reduces friction temperature, resulting in longer lubricating effect. • Low wear. • Contains no silicone, resin or acid. • Operating temperature range: –25°C to +150°C Temporarily: +170°C. • Colour: Opal Green Applications: Suitable for open lubrication with high dirt and weathering influence, e.g. gearwheels, wire cables, chains, spring tensioners, anti-friction bearings etc. This information is only a recommendation based on our experience. Preliminary testing required. Partner Product: HHS Clean Viscosity index Description Contents Art. No. Pack Qty. HHS Lube 500ml 0893 106 5 1/6 Sealing behaviour against dirt and splash water. The grease forms a sealing „grease collar“ against moisture and dirt particles between the opposing body and the base body (Fig. 1). The dirt cannot reach the lubricating point, ensuring long-term lubrication. The lubricating intervals extended in this way are only possible with good pre-cleaning of the lubricating point, and we therefore recommend thorough cleaning with HHS Clean, Art. No. 0893 106 10, before every use. Fig. 1 seal seal dirt particles BASE BODY SEALING OPPOSITE BODY MOVEMENT Manner of operation of OMC 2 technology. (thermoplastic surface smoothing) From a microscopic standpoint, all metal surfaces are rough (Fig. 2.1) and are subject to constant wear and substance loss when subjected to friction (environmental influences). HHS Lube with OMC� technology smoothes the metal surfaces by means of thermoplastic flow deformation (Fig. 2.2 and 2.3), ensuring the longer life of the components.Fig. 2.1 Fig. 2.2 Fig. 2.3 NZ. pub. 10/14 ©