Web Catalogue update October 2019

PVA GLUE 05 4301 NZ. pub. 10/15 © For gluing all types of wood. Complies with loading group D3, after adding hardener D4 according to DIN EN 204. • Highly resistant to water. • Tested D3 and D4 quality according to DIN EN 204. Tested by the Institut für Fenstertechnik (Institute for Window Technology) in Rosenheim, Germany. Test Report No. 50524485. • For universal use. • For structural set-up of moisture-resistant windows, doors and stair cases, as well as gluing of assembly, surface and board joints, and block gluing with more demanding requirements for water resistance. • Transparent hardening. • No visible gluing joints. Hardened adhesive joints are viscoplastic. Notes on Application: • Apply thin, even layer of Cold Wood Adhesive D3/D4 on one side with adhesive roller, adhesive spatula, adhesive brush or application machine. • When gluing external joints (e.g. front door cassettes), the effects of heat (direct exposure to sunlight) can result in tensions in wood and softening of glued joints. • In conjunction with the tannic acid of the wood, the influence on bare metal can lead to blue discoloration especially with oak and to red discoloration with beech. In isolated cases, substances contained in wood can lead to unpredictable discolourations with various types of wood, e. g. beech, cherry or maple. • At a pressing temperature above +50°C , a brown discolouration can result with softwoods. • Fresh splashes of adhesive can be removed with water. Older adhesive residues can be softened with nitro thinner or acetone and then rubbed off. Stir contents thoroughly before application and always close bottle tightly after use. Protect from frost. • The processing time and the hardening time are highly dependent on the working conditions, e.g. the temperatures, moistures and absorption of the materials, application quantities and tensions in the material. Application: Gluing with Cold Wood Adhesive D3/D4 without hardener: Indoors with frequent short-term effect of water flowing off or condensed water and outdoors when protected against weathering. • Gluing indoor doors. • Indoor stairs and handrails. • Gluing of living room, kitchen and bathroom furniture. • Assembly, surface, board-joint and block gluing. • Stationary edge coating with veneers and solid-wood strips. • Soft, hard, and exotic woods and particle boards. Gluing with Cold Wood Adhesive D3/D4 after adding hardener: Indoors with frequency, heavy effect of water flowing off or condensed water, as well as outdoors exposed to weathering, however with suitable surface protection. Protect from direct sunlight. • Gluing front doors (block frame connection). • Window gluing, frame joining, laminated profiles and profiles bound lengthwise via dovetail joints. • Soft, hard, and exotic woods and particle boards. Container Contents Art. No. Pack Qty. Bottle 0.5g 0892 100 16 1/6 Bucket 28kg 0892 100 150 1