Web Catalogue update October 2019

LACQUER GLUE 05 4273 NZ. pub. 06/16 © With this information we want to advise you to the best of our knowledge based on our tests and experience. Preliminary testing required! Please observe the technical data. Technical Data Chemical basis Synthetic resin dispersion Container Bottle Weight of content 0.5 kg Density 1 g/cm³ Silicone-free Yes Colour Beige pH value 8,5 +/-0,5 Min. film forming temperature 5 °C Min./max. open time /conditions 6-8 min / at 20°C and 150 g/m² Max. post-bonding time 3 h Max. temperature resistance of the hardened material 80 °C Min. room temperature, material temperature and glue temperature 18 °C Min./max. processing temperature 10 to 40 °C Min. pressing pressure 0.2 N/mm² Min. press-setting time of glue 15 min Conditions for press-setting time of glue Specified processing conditions: a joint part must be able to absorb moisture Min./max. wood moisture 8-10 % For gluing on painted and plastic surfaces Excellent paint adhesion Broad range of applications and excellent adhesion to many common painted surfaces without the need for sanding. High level of gluing quality Fast-hardening dispersion glue with excellent paint adhesion. Good resistance to moisture and heat. Hardened glued joints are viscoplastic. Causes no discolouration. Broad range of applications Can be applied manually and in glue pressure containers. Container Contents Art. No. Pack Qty. Bottle 500g 0892 100 18 1/6 Application • Indoor use with occasional brief exposure to water draining water or condensation water • Gluing of carcasses with melamine resin-coated and painted surfaces • Gluing, e.g. of cabinets, internal doors, kitchen worktops, door frames, tables, corner benches • Gluing of wood and wooden materials or MDF on DD varnish, polyester surfaces, SH varnish, water varnish, DKS surfaces, melamine resin surfaces and HPL surfaces Instructions At least one joint part must be absorbent. Apply a thin, even layer of glue for painted surfaces on one side with a glue bottle, glue roller, glue spatula, glue brush or application machine. Fresh splashes of glue can be removed with water. Older adhesive residues can be softened with nitro thinner or acetone and then rubbed off. Always close the bottle after use.