Web Catalogue update October 2019

SKG - SUPER FAST GEL ADHESIVE 05 4001 Cyan acrylate assembly glue, gel-type. • Stable consistency. • The gel-type consistency prevents flowing or dripping to a large extent. • Quick curing. • The adhesive is cured completely within a very short time. • Universal use. • Glues smooth as well as absorbent surfaces. • Clean application . • Simple and quick opening of the cap makes work easier. Application: The components to be bonded must be clean, free from grease and dry. A very thin uniform layer of adhesive is to be applied to only one of the surfaces to be bonded. Produce immediate bond by applying sufficient pressure for complete contact. Maintain pressure during the time needed for hardening. Application Surfaces: Metal, cork, felt, leather, rubber, porcelain, synthetics (e.g. hard PVC, ABS, polystyrene) with and among each other. Areas of Application: Bonding of rubber profiles for wooden and synthetic windows, attachment of signs, installation of rubber seals, repairs of broken edges. With this information we wish to advise you on the basis of our trials and experience to the best of our knowledge. However, we cannot accept responsibility for the result when using this material in the individual case because of the multitude of applications and of the conditions of storage and processing which are outside our influence. This is also valid when making use of our technical and commercial customer service which is supplied without obligation. We recommend always to carry out individual tests. We guarantee consistent quality of our products. The right to carry out technical changes and development is reserved. Description Contents Art. No. Pack Qty. SKG Super Fast Gel Adhesive 5g 0893 403 1/10 Specifications Base Enthyl cyanoacrylate Colour Transparent Hardening System By air humidity Viscosity 300 000 mPa·s (Brookfield) Density 1.08 g/cm 3 Ideal Processing Temperature +20°C Temperature Resistance -50°C bis +80°C Fusion Point +165°C Curing Speed 20-100 sec. (depending on material) Final Strength After 24 hours Tensile Strength 20-30 N/mm 2 acc. DIN 53288 Combines Tension and Shear Resistance 25.5 N/mm 2 acc. DIN 53283 Joining Gap Ideal 0.05 mm, max. 0.25 mm Shelf Life 12 months (cool and dry) NZ. pub. 10/14 ©