Web Catalogue update October 2019

02 0695 AUS. pub. 09/18 © EXTRACTION DRILL BIT - PLUS TYPE Properties: Drilling Speed ●●●○ Operational Smoothness ●●●○ Accuracy ●●●○ Reinforcement Strength ●●○○ Service Life ●●●● Vacuum attachment hammer drill bit with excellent service with multi-cutter head for drilling and suction in one work step. Dust-free drilling. • The dust is extracted as soon as it is produced in the drill hole. • Increases the service life. • No subsequent cleaning of the drill hole is required. • Significant reduction of dust produced on the construction site. Perfect drilling properties over the entire service life. • Head geometry that is tailored to the drill bit diameter. • 12–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability. • 18-24 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces. Suitable for all standard, certified vacuum cleaners of dust class M. • Flexible, one-piece rubber vacuum adapter (35 mm diameter). • Suitable for drills with plus type mounting systems. Precise spot drilling. Special self-centring tip. Diameter (Ø) Length Working Length Art. No. P. Qty 12 mm 320 mm 200 mm 0648 401 232 1 14 mm 370 mm 250 mm 0648 401 437 16 mm 0648 401 637 18 mm 0648 401 837 Application Areas: • Clean, dust-free drill holes for inserting chemical anchors. • Drill holes for subsequent installation or for the replacement of incorrectly inserted reinforcement bars. • Work in critical areas that must be kept free of dust, such as public buildings, hospitals etc. • Renovation work where dust should be avoided and the user should be protected. Notice: • Iron reinforcements may only be drilled through with permission from a structural engineer. • Observe the enclosed operating instructions. From Ø 18 mm Up to Ø 16 mm Only use with vacuum cleaners of dust class M. Length Working Length Art. No. Pack Qty. 320 mm 200 mm 0648 01 232 1 370 mm 250 mm 0648 01 437 0648 01 637 0648 01 837 20 mm 0648 402 037 24 mm 0648 402 437 AUS. pub. 09/18 © EXTRACTION DRILL BIT - PLUS TYPE Properties: Drilling Speed ●●●○ Operational Smoothness ●●●○ Accuracy ●●●○ Reinforcement Strength ●●○○ Service Life ●●●● Vacuum attachment hammer drill bit with excellent service with multi-cutter head for dril in and suction in one work step. Dust-free drilling. • The dust is extracted as soon as it is produced in the drill hole. • Increases the service life. • No subsequent cleaning of the drill hole is required. • Significant reduction of dust produced on the construction site. Perfect drilling properties over the entire service life. • Head geometry that is tailored to the drill bit diameter. • 12–16 mm: One-piece carbide element — maximised attachment surface with the steel body gives high stability. • 18-24 mm: Multi-piece carbide element for faster drilling progress, and trisection design to improve buffering of torsional forces. Suitable for all standard, certified vacuum cleaners of dust class M. • Flexible, one-piece rubber vacuum adapter (35 mm diameter). • Suitable for drills with plus type mounting systems. Precise spot drilling. Special self-centring tip. Diameter (Ø) Length Working Length Art. No. P. Qty 12 mm 320 mm 200 mm 0648 401 232 1 14 mm 370 mm 250 mm 0648 401 437 16 mm 0648 401 637 18 mm 0648 401 837 Application Areas: • Clean, dust-free drill holes for inserting chemical anchors. • Drill holes for subsequent installation or for the replacement of incorrectly inserted reinforcement bars. • Work in critical areas that must be kept free of dust, such as public buildings, hospitals etc. • Renovation work where dust should be avoided and the user should be protected. Notice: • Iron reinforcements may only be drilled through with permission from a structural engineer. • Observe the enclosed operating instructions. From Ø 18 mm Up to Ø 16 mm Only use with vacuum cleaners of dust class M. t f i li . W p NZ. pub. 08/19 ©