Web Catalogue update October 2019

LONGLIFE HAMMER DRILL WITH QUADRO DRILLING HEAD 02 0691 NZ. pub. 11/16 © Newly developed innovative 4-spiral hammer drill with SDS-plus mounting shaft, centering tip and 4-edge all- carbide element for considerably more precisely drilled holes. • Symmetrical 4-edge drilling head with centering tip ① , 4 reinforcing chamfers ② and one-piece all-carbide element with maximized connecting surface ③ between carbide and steel body. • Up to 50 % more drilled holes suitable for dowels than with comparable hammer drills. • No hooking in when hitting reinforcement, and therefore considerably longer service life. • No running crooked thanks to precise tapping. • High break resistance. • Low-vibration drilling and extremely smooth running. • True 4-spiral helix geometry with scooping spiral. • 4 spiral backs contact wall of drilled hole → optimum drilling dust transport. • Higher stiffness of drill bit. • Cylindrical drilled holes. •Faster drilling dust transport. Advantages ① ② ③ 30% TIME SAVINGS OVER OTHER LEADING COMPETITORS Dia. in mm Total Length in mm Working Length in mm Art. No. Pack Qty. 5 110 50 0648 005 011 2/10 160 100 0648 055 016 6 110 50 0648 006 011 2/10/50 160 100 0648 056 016 265 200 0648 006 026 6.5 160 100 0648 056 516 2/10 210 150 0648 056 521 2 265 200 0648 006 526 8 210 150 0648 058 021 2/10 460 400 0648 008 046 1 10 160 100 0648 051 017 2/10 210 150 0648 001 021 310 250 0648 001 031 450 400 0648 001 045 1 12 160 100 0648 001 216 2/10 210 150 0648 001 221 310 250 0648 051 231 1 450 400 0648 001 245 14 160 100 0648 001 416 2/10 210 150 0648 001 421 310 250 0648 051 431 1 450 400 0648 001 445 1 16 210 150 0648 001 621 450 400 0648 001 645 18 0648 001 845 20 0648 002 045 24 0648 002 445 25 0648 002 545 26 0648 002 645 30 0648 003 045