Web Catalogue update October 2019

12 5062 CONTENTS OF THE DENT LIFTER SET NZ. pub. 11/17 © Item Description Set Cont. Art. No. Pack Qty. 1 Sliding Hammer 1 0691 500 112 1 2 Glue sticks (0.5kg special adhesive, ø 12mm) 1 0890 100 057 1 3 Adaptor, round, stiff (yellow), ø 40mm suitable for round and large deformations. The adaptor material enables high tensile forces and stress. 10 0691 500 115 10 4 Adaptor, round, flexible (purple), ø 40mm suitable for round and sharp edged deformations. The adaptor material can be adjusted to the shape of the dent by means of heating. 10 0691 500 116 10 5 Adaptor, oval, stiff (yellow), 47 x 33 mm suitable for scratches and grazing marks. The adaptor material enables high tensile forces and stress. 10 0691 500 117 10 6 Adaptor, oval, flexible (purple), 47 x 33 mm suitable for scratches and grazing marks. The adaptor material can be adjusted to the shape of the dent by means of heating. 10 0691 500 118 10 7 Adaptor, round, small (blue), ø 35 mm suitable for round and small deformations. The adaptor material can be adjusted to the shape of the dent by means of heating. 10 0691 500 121 10 8 Special spatula, flexible (adhesive residues can be easily removed from it). 1 0691 500 120 1 9 Acetone cleaner (for unpainted metal surfaces and glass). 1 0893 460 1 10 Pre-cleaner (for plastics, painted metal surfaces and glass parts). 1 - 1 11 Installation attachment for adaptor (for optimum installation and removal). 1 - 1 12 Gloves, size 9 (protect against undesired burns). 1 - 1 13 Grinding fleece (to roughen adaptors for initial use). 2 - 1 14 Cleaning towels (optimum for use with acetone and glass cleaner). 50 - 50 1. Clean dent using acetone or brake cleaner. 5. Using a hot air gun heat the adaptor up to approx. 150°C and push it away to the side using the installation attachment. 6. Heat up the adhesive residue and remove it using special spatula. 7. Remove remaining adhesive residue using glass cleaner. 2. Install suitable adaptor on installation attachment and apply special adhesive to centre. 4. Hand sliding hammer into the adaptor and straighten dent. 3. Glue adaptor to deepest spot and cool using compressed air. Applications: