Web Catalogue update October 2019

11 1802 NZ. pub. 10/16 © To eliminate the most common problems experienced with Sprayable Seam Sealer and Spray Sealer Gun PS3 + PS4. Problem Solution Paint not sticking: Use 2 pack paint only. Product must dry for at least 20 minutes. Product must not be allowed to dry longer than 2 days. Product spitting when beading: Maximum pressure of 4 bar or 60psi. Bleed air adjuster off (1) when going from spraying to beading, on half trigger. Air adjuster (1) must remain off when beading. Check white washers are not too old. Store product upright on shelf. Hand bleed cartridge when opening tube. If gun has been pulled apart, make sure a high strength thread sealer DOS. Art. No. 0893 270 0 has been used to reseal threads. Product not drying: Check dates on product. Painted product too soon. Product spraying crooked: Clean out spray nozzle properly. PS4 SPRAY SEALER GUN - INFORMATION