Web Catalogue update October 2019

PETROL SYSTEM CLEANER 08 0545 NZ. pub. 05/16 © For cleaning the intake system of all carburettor and EFI engines with or without catalyst. Cleans the entire intake area, combustion chambers and valves of all petrol engines. • Even distribution of cleaner in intake area by using an aerosol can fitted with a special spray hose. • Reduces fuel consumption. • Improves engine performance, accelerator response and warm-up phase. Cleans inlet and exhaust valve guides. • Leads to a more even compression pressure. Protects against burnt out valves and ensures secure valve seating. • Increases life of the engine. Contains petrol compatible detergents in an active cleaning solution. Application: Attach spray probe to can. Disconnect an engine vacuum hose at a suitable point and insert spray probe. With the engine warm and running at about 2,000 rpm, spray half of the product into the inlet manifold whilst simultaneously moving the probe to and fro to ensure even distribution to all inlet parts. Allow 30 minutes for the product to take effect. After which, repeat the procedure with the rest of the product. Dosage: 1 can for a 4-cylinder engine; 2 cans for engines with 6 or more cylinders. Note: System Cleaner can only be used in conjunction with Wurth Spray Probe to all inlet parts. Allow 30 minutes for the product to take effect. After which, repeat the procedure with the rest of the product. Uses / Areas of Use: • In the event of a loss of compression. • If fuel consumption increases. • If engine performance decreases. • In the event of delayed accelerator response. • Particularly suitable for use before tuning the engine and analysing exhaust gas emissions. Description Contents Art. No. Pack Qty. System Cleaner* 300ml 5861 112 300 12 Spray Probe – 0891 564 1 CAUTION: NOT to be used on diesel engines. Oil Fuel Trans Steering Cooling Exhaust Air-Con Intake *Order spray probe separately