Web Catalogue update October 2019

Description Art. No. Pack Qty. Seal, yellow** 0558 991 41 100 Seal, red* 0558 991 42 Terminal, female 0558 995 82 Terminal, male 0558 995 81 0558 995 82 0558 995 81 * ** WATERPROOF PLUG AND SOCKET CONNECTOR SYSTEM 07 4531 Specifications: The plug and socket connector system is environmentally sealed and corresponds to all regulations of the required automobile standards. • Meets specifications IEC 529 and DIN 40050 IP67. • Accepts cable: Ø1.8 - 3.3mm. • Current rating: 14 amps max. • Temperature range: -40°C to +125°C. • Voltage: 24V max. Important: To ensure a perfect electrical connection can be created in the event of a repair, we recommend that all connectors and casings be replaced at the damaged part. 2 Pin Art. No. Pack Qty. Plug Housing 0555 103 2 4 Socket Housing 0555 102 2 3 Pin Art. No. Pack Qty. Plug Housing 0555 103 3 4 Socket Housing 0555 102 3 4 pin Art. No. Pack Qty. Plug Housing 0555 103 4 4 Socket Housing 0555 102 4 0555 103 2 0555 102 2 0555 103 3 0555 102 3 0555 103 4 0555 102 4 0555 103 5 0555 102 5 0555 103 6 0555 102 6 5 Pin Art. No. Pack Qty. Plug Housing 0555 103 5 4 Socket Housing 0555 102 5 6 Pin Art. No. Pack Qty. Plug Housing 0555 103 6 4 Socket Housing 0555 102 6 Vehicle Wire Diameter: * Ø 2.6–3.3 mm / ** Ø 1.8–2.4 mm Note: Secondary locking of plug housings can be removed by hand. Tip Description Art. No. Releasing tool for pin and socket contacts 0713 558 241 Releasing tool for secondary lock of pin housing 0713 558 610 Ejector Tools: Note on application: Secondary lock of socket hou- sing can be removed without special tool. Remove secondary lock of pin housing using releasing tool Art. No. 0713 558 610. Raise plastic tab in housing with releasing tool Article No. 0713 558 241 and remove contact from housing by pulling lightly on wire. Contents: Art. No. Pack Qty. Contents: Plug and Socket Housings from 2 to 6 pin = 40 parts. Seals and Terminals = 400 parts Total = 440 pieces. 5964 055 501 1 NZ. pub. 09/17 ©