Web Catalogue update October 2019

WATERTIGHT CRIMP CONNECTORS 07 3061 With adhesive seal. Hole Dia. mm Cable mm² Art. No. Pack Qty. 4 0.5 - 1.5 0555 901 1 25/100 6 0555 903 1 Hole Dia. mm² Cable mm² Art. No. Pack Qty. 4 1.5 - 2.5 0555 908 2 25/100 6 0555 910 2 8 0555 911 2 WATERTIGHT CRIMP JOINERS With adhesive seal. Instructions: • Insert stripped cable, and squeeze with standard crimping pliers. • Apply heat from a source such as a hot-air gun or solder torch to shrink tube until adhesive emerges at the cable end. Cable mm² Colour Art. No. Pack Qty. 0.5 - 1.5 0555 516 1 25/100 1.5 - 2.5 0555 516 2 4 - 6 0555 516 4 CRIMPLESS HEAT SHRINK JOINERS Max.bundle dia.in mm Length in mm. Art. No. Pack Qty. 2.7 Approx.42 0555 923 1 25/100 4.5 Approx.42 0555 923 2 6.0 Approx.42 0555 923 3 25/50 • No need to crimp. • No need for expensive crimping tools. • Allows for flexibility. • Secure solder join. • Water tight ends on straight joiners. • Solder is clearly visible between wire. • Temperature resistant up to 150°C. • Suitable for automotive, marine, mowers, and industrial use. • 12V / 24V only. Instructions: Strip the insulation from wire. Insert the stripped wire ends into the connector and position them under the solder ring. Apply heat using a heat gun or solder torch until the solder ring has melted completely and the insulating sleeve has shrunk to the required size. NZ. pub. 10/14 ©