Web Catalogue update October 2019

06 3801 NZ. pub. 08/15 © JAMO PLUS SCREWS The screw for adjustable changes to spacing after installation. For mounting wood substructures to wood substrates without pre-drilling. Precise positioning, no rupturing. Precise positioning of the screw is no problem, all thanks to its centering drilling tip, which was specially developed for this purpose. The drilling tip cutting edges guarantee perfect drilling tip performance, just like a Forstner bit. They also prevent irritating splitting or rupturing of the wood. Milling pockets for easy and clean countersinking. Easy and clean countersinking of the screw is made possible thanks to its milling pockets. Chips formed at the surface during the screwing-in process are collected. AW ® drive for optimum guidance and transmission of force. Thanks to the AW ® drive, a tight fit of the bit in the screw drive is guaranteed. This prevents wobbling impacts and sliding of the bit from the screw while screwing in. 25% reduction in adjustment time. In comparison to comparable levelling screws, lots of time can be saved when adjusting the screw thanks to the increased pitch of the thread. Note: When selecting the screw length, keep in mind that the thread must be fully anchored in the surface. Dia. d in mm l in mm lg in mm b in mm dh in mm Drive Art. No. Zinc, Blue Passivated P. Qty. 6.0  70 33 38 12.0 AW ® 30 0234 465 70 100  90 55 60 0234 465 90 110 65 70 0234 465 110 Before Without drilling tip After With drilling tip Screw in Jamo plus screw with AW ® 30 drive until wood lath contacts surface and screw head is countersunk at least 2 mm into wood lath. Set driver to counterclockwise and turn back screw until wood lath reaches desired spacing. Position Jamo screw Screw down wood lath Adjust spacing Partner Products: Power Tools Drive Bits Spirit Levels 2