Web Catalogue update October 2019

06 3744 NZ. pub. 10/15 © ASSY ® 3.0 SK Application: ASSY ® 3.0 SK with a large disk head is especially suited for staircase construction/ woodworking/carpentry for screw connections in staircase construction, modular construction, wooden and passive house construction. Tip: The 34° tip enables precise starting. Screw with counter thread in tip area, which greatly reduces the splitting forces of the wood, especially in the edge area. The screw-in torque is considerably less than with conventional particle board screws and extends the service life of the processing machine and the bit insert. Thread: The plastic glide-coated asymmetrical coarse thread means a 30 % savings in working time. End mill: The end mill after the thread reduces the screw-in torque by 20 %. Thin shaft: The thin shank enables a tension-free connection without gaps. Head: Large disk head with AW ® drive Material: Hardened steel, galvanized, yellow Note: Do not use the screw in applications exposed directly to the elements, in humid rooms and in atmospheres containing chlorine gas. For applications outdoors and in rooms which are briefly or constantly subjected to high humidity, please use the stainless-steel screw ASSY ® 3.0 SK A2 in this case. ASSY ® 3.0 particle board screws are optimized for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. For this reason, we recommend only using screws without optimized thread tips (drilling tip, counter thread, ring thread, ground corrugated, self- clearing groove etc.), e.g. anchor screws, Pre. No. 0157, hex. wood screws DIN 571, Pre. No. 0192, Wüpofast ® screws, Pre. No. 0186, 0198). ETA-11/0190 d in mm l in mm lg in mm dh in mm End mill Drive Art. No. galvanized, yellow P. Qty. 8.0 120 80 22.0 x AW 40 0184 808 120 50 160 x 0184 808 160 200 x 0184 808 200 Storable in ORSY ®