Web Catalogue update October 2019

ASSY ® 3.0 ZINC-NICKEL The Wurth Zinc Nickel surface is highly corrosion resistant and is in line with the Australian Corrosion resistance class III. (AS. 3566-2). Based on International Standards (ISO 9223), the Zinc Nickel surface is classified as a Class 5 corrosion resistant coating. ISO 9223 is an accordance with AS 3566-2 (Australian Corrosion Categories) Your advantages: • The ASSY® screw combines the stability of a steel screw with excellent rust protection. • Suitable for use outdoor covered areas, ie. pergolas, carports etc. (covered, open structures). It's coating gives the ASSY® a high-quality appearance. • Attention : Screws may not be used for – Wood containing large amounts of tannic acid, – Boiler-pressure impregnated wood, – direct weathering (Utilization class 3). • Chrome-VI-free. Naturally, they feature all the advantages of the ASSY ® screws: Asymmetrical thread prevents overturning and makes screwing in easy. drive for perfect bit clamping. Milling pockets for clean countersinking - in construction fittings as well. End mill (with diameters of 5 mm or more and lengths of 70 mm or more) for less friction on the shaft. Ring/counter thread at the tip enables screwing in close to the edge. 06 3722 NZ pub. 06/16 © ETA-11/0190 d in mm L in mm b in mm dk in mm Drive End mill Art. No. Pack Qty. 5.0  50 30 9.60 AW 20 without 0170 850 50 250  70 42 with 0170 850 70 200 6.0  50 32 12.00 AW 30 0170 860 50 250  80 50 0170 860 80 100 100 60 0170 860 100 120 70 0170 860 120 150 70 0170 860 150 8.0 120 80 14.85 AW 40 0170 880 120 75 160 0170 880 160 200 0170 880 200 260 100 0170 880 260 300 0170 880 300