Web Catalogue update October 2019

WING PIAS ® PLATE COUNTERSUNK HEAD 06 3693 NZ. pub. 06/15 © with milling ribs and drive Steel, Ruspert ® -coated (gray) Tapping screw thread. With milling ribs for soft and hard wood on steel substructures. The self-tapping screw for fastening wood to steel substructures. Advantage: Corrosion protection Ruspert ® - coated approx. 500 h no base metal corrosion as per DIN EN ISO 9227 – NSS (electro-galv. - approx. 48 h) Galvanized drilling screws may only be used where dampness is not to be  expected. Nominal dia. d in mm Length l in mm Max. fastening length l B in mm Art. No. Pack. Qty. 6.3 55 33 0219 063 55 250 65 43 0219 063 65 80 58 0219 063 80 Nominal dia. d in mm 6.3 Head dia. max. dk in mm 20 Drilling tip length lp in mm 15 Drive AW 30 Drilling range (steel) in mm 2.0 - 6.0 WING PIAS ® COUNTERSUNK HEAD with milling ribs and drive Steel, Ruspert ® -coated (gray) With milling ribs for soft and hard wood on steel substructures. The self-tapping screw for fastening wood to steel substructures. Advantage: Corrosion protection Ruspert ® - coated approx. 500 h no base metal corrosion as per DIN EN ISO 9227 – NSS (electro-galv. - approx. 48 h) Galvanized drilling screws may only be used where dampness is not to be  expected. Nominal dia. d in mm Length l in mm Max. fastening length l B in mm Art. No. Pack. Qty. 8 65 33 0219 008 65 250 80 48 0219 008 80 100 68 0219 008 100 Nominal dia. d in mm 8 Head dia. max. dk in mm 15 Drilling tip length lp in mm 18 Drive AW 40 Drilling range (steel) in mm 3.0 - 12.0 Note: Wing pias ® have to be appropriately tested for usability before each application. Use only application equipment with depth stop and claw clutch. Note: Wing pias ® have to be appropriately tested for usability before each application. Use only application equipment with depth stop and claw clutch.