Web Catalogue update October 2019

PLASTERBOARD PLUGS W-GS 06 2191 Type K = Nylon Type Z = Die Cast Zinc Uses: • Ideal for fixing into plasterboard, lightweight building board and lightweight concrete. • Use in the electrical sector for the attachment of cable ducts, panels, fuse boxes, cable clamps, lighting strips, lights, sockets etc. • In the sanitary sector for attaching pipe clamps, panels, mirrors etc. • For the attachment of internal fittings such as lightweight cupboards, curtain rails, pictures, notice boards etc. • For wood/chipboard screws. Advantages: • No drilling required. • Direct anchorage into the substructure. • Also suitable for use in moist areas in combination with stainless steel screw. • The plug and screw can be used with the same driver saving time. Advantages: • Thread is cut into the soft substructure with perfect contact. • Low space requirement behind the panel (min 15mm). • Corrosion resistant. Press points of plug into surface. Drill in until flush with surface. Attach fixture. Twist Lock Can be used with P2 Bit, AW Bit or Tx Bit. Setting Instructions: Type Dimensions 0 Collar x L mm Version Art. No. Pack Qty. W-GS-K 14.5 x 33 Nylon 0903 251 1 50/100 W-GS-Z 14.5 x 33 Die Cast Zinc 0903 252 1 Substructure Screw Dia mm Type K Screw Dia. mm Type Z Load at fracture kn Plasterboard 9.5mm 4.5 - 6 5 0.6* Plasterboard 12mm 4.5 - 6 5 0.6* * An appropriate safety factor should be taken into account on these loads determined at fracture. (e.g. 3-fold). (1kn=100kp=100kg) Note: The weight to be exerted on a plasterboard wall should be carefully taken into consideration. These types of substructures are not designed to hold heavy weights. 73 NZ. pub. 07/16 ©