Web Catalogue update October 2019

WIT P200 - ACCESSORIES 06 2132 NZ. pub. 12/15 © Description Art. No. Image Pack Qty. Application Gun 0891 003 104 A 1 Static Mixer 0903 420 001 B 10 Accessories Drill hole. Insert perforated sleeve. Inject the adhesive starting at the back of the hole/sleeve and completely fill it by slowly withdrawing the mixer with each trigger pull. Insert the anchor rod or threaded sleeve into the mortar while slowly turning. Note setting time. Install component, apply torque. Material: Concrete, Solid  Bricks. Material: Perforated Bricks. Drill hole. Clean drill hole. Inject the adhesive starting at the back of the hole, slowly withdrawing the mixer with each trigger pull. Insert reinforcing bar or threaded rod while turning. Install component, apply torque. Screw mixer onto cartridge. An initial amount of 10 cm adhesive has to be discarded. Check mortar filling quantity visually. Note setting time. Installation Instructions: (4 x blow out/ 4 x brush out/ 4 x blow out) M20 and larger, blow out with compressor. 45 A B