Web Catalogue update October 2019

TECHNICAL DATA OF METAL SURFACE SPRAYS 05 5032 Product Name Zinc Spray Light Perfect Aluminium Spray Matt Perfect Stainless Steel Spray Perfect Zinc Perfect Spray Art. No. 0893 114 114 0893 114 115 0893 114 116 0893 114 113 Chemical Basis Alkyd resin combination Alkyd-acrylate combination Alkyd-acrylate combination Acrylic Resin Pure Zinc 98.50% - - 99% Cross cutting (DIN 35151)* Gt0-1 Gt0-1 Gt0-1 GT 0-1 Salt spray test (DIN 50021 SS) 250 hrs - - 500 hrs Dry layer thickness 1 Back-and-forth motion approx. 40 μm approx. 50 μm approx. 30 μm approx. 40 μm Recomm. layer thickness 40 μm 50 μm 30 μm 40 μm Dust-dry (with recommended dry layer thickness) approx. 15 min. 20-30 min. approx. 15 min. Completely hardened (with recommended dry layer thickness) 10 - 12 hrs approx. 8 hrs 10 - 12 hrs Touch-dry (with recommended dry layer thickness) 15 - 20 min 45 - 60 min 20 min 20 min Can be spot-welded Yes - - Yes Thermal stability approx. +300°C approx. +250°C approx. +240°C Maximum shelf life at +10°C - +25°C in months 24 24 24 24 Can be painted over with Common top coat paints Acrylate based top coat points Acrylic and synthetic resin-based top coat paints Can be covered with filler Yes, with 1-comp. fillers; e.g. synthetic resin fillers No Yes, with 1-comp. fillers; e.g. synthetic resin fillers Surfaces with good adhesion Ferrous metals Galvanised surfaces Polycarbonate Polystrene, PMMA Metal, wood, pasterboard, Polycarbonate Polystrene, PMMA Metal, wood, pasterboard, Polycarbonate Polystrene, PMMA Steel, Galvanised Steel * Test to determine the adhesion of a coating on foundations. GT0 = Very good adhesion. GT5 = Very bad adhesion. NZ. pub. 10/14 ©