Web Catalogue update October 2019

POWERBOND 05 4221 High-strength two-component epoxy resin system for repairs to motor-vehicle bodies. • High-strength epoxy resin adhesive. • The repair restores the original strength and stiffness.• Fewer spot welds. • Meets the requirements of motor-vehicle manufacturers. • Glass-particle technology. • Even if strong pressure is exerted, an adhesive thickness of 0.7 to 1.2mm remains. • Excellent stability. • The adhesive will not run on vertical surfaces (thixotropic). • Excellent corrosion protection. • The original rust resistance is maintained. • Corrosion is prevented at welds.• Can be through-welded. • Can be ground and painted over. • Free of silicone and VOC. Applications: Structural adhesive for steel, aluminum and fiber-reinforced plastics (FRP, CFRP). For gluing motor-vehicle body parts such as side-walls, wheel arches, roof and door plates. Note: Not suited for load-bearing vehicle body parts (e.g. A-pillar, frame side bar). If body parts are only partially replaced, do not glue on visible surfaces since shadow seams may appear. Observe the vehicle manufacturer’s repair instructions. Replaceable parts Technical Data Chemical basis Epoxy resin Color black Density 1.1 g/cm³ Application temperature +15°C to +25°C Application time 60 min.* Hardening time 4 hr.* Final strength after 72 hr.* Shore D hardness (DIN 53505) 80 Tensile strength (ASTM D-638) 30 MPa* Tensile shear strength (EN 1465) 1.7 MPa (after 4 hr.)* 13.3 MPa (after 8 hr.)* 19.0 MPa (after 17 hr.)* Resistant to Fuels (petrol, Diesel oil), motor and transmission oil, coolant. Thermal stability –30°C to +120°C (for short peaks up to +190°C) Durability 12 months How the glass-particle technology works The glass particles prevent the adhesive from being completely squeezed out by high fixation pressure. This ensures that the necessary minimum amount of adhesive remains between parts to be glued. Pressed-on adhesive with glass particles as “distance keepers” Adhesive with glass particles Metal (sheet-metal) 0.7-1.2 mm This information is only a recommendation based on our experience. Preliminary testing required. Partner Products: Acetone Cleaner Belt and Sander DBS 3600 Flexi-Disc Nylon Fleece Disk Powerlocs Description Contents Art. No. Pack Qty. Powerbond Motor-Vehicle Body Adhesive 225ml 0893 450 100 1/6 Positive Mixer - 0891 450 101 15 Application Gun - 0891 450 100 1 NZ. pub. 10/14 ©