Web Catalogue update October 2019

REPLAST EASY 05 4061 NZ. pub. 02/17 © Complete system for easy and professional repairs of plastic parts. • An adhesive for almost all types of plastic.* • No complex treatments of different types of adhesives. • Useable for repairs and structural bonding. • Special positive mixer • Optimal mixing for small volumes. • Low loss of adhesive (waste). • Cures quickly. • Further processing, e.g. grinding, possible after minimum period of time. • Solvent-free adhesive. Areas of Application: Passenger Vehicles: Spoilers, radiator grill, panelling clips, bumpers, brackets on headlamps and radiator, etc. Trucks and Buses: Skirts, bumpers, air intake duct, wheel arches, etc. Motorbikes: All panelling. Description Contents Art. No. Pack Qty. Replast Easy 1.5 220ml 0893 500 03 1 Plastic Primer 200ml 0893 500 2 1 Fast 2C-Plastic Adhesive 50ml 0893 500 3 1 Reinforcement Tape 3.5ml 0893 500 6 1 Contour Film 3.5ml 0893 500 7 1 Transparent Plastic Adhesive 50ml 0893 500 8 1 Positive Mixer - 0891 486 25 Mixing Tips 1 pk of 6 0891 604 1 Application Gun (plastic) - 0891 893 486 1 Application Gun (Metal - Heavy Duty) - 0891 893 485 1 Application Gun (Replast Easy 1.5 220ml) - 0891 450 100 1 Technical Data Fast 2C-plastic adhesive Application Time 1.5 min Can be sanded at 23°C after 10 min Shore Hardness D 79 Colour black Maximum Temperature 100°C Can be painted after 10 min Application Gun - This information should only be seen as containing recommendations based on our experience. A preliminary test must be carried out. *Note: Due in part to the coatings and release agents used when manufacturing plastics, in isolated cases there may be adhesion problems. Not suitable for the plastics PE (polyethylene) and PP (polypropylene) and PTFE (polytetrafluoroethylene). If necessary, check material compatibility in an inconspicuous place. • Due to temperature resistance and material compatability issues, this is not recommended for plastic radiator or fuel tanks.