Web Catalogue update October 2019

PURLOGIC CLEAN 05 3321 NZ. pub. 10/14 © For the removal of fresh PU foam. Note: Cleans and removes fresh excess PU foam from wood, metals and many types of garments. Not suitable for fully cured PU foam residue. May etch surfaces such as paintwork and plastics. Textiles may become lighter in colour or etched. • Highly effective. • Dissolves all fresh foam contaminations quickly and easily. • Optimised for use with PU foam guns. • The PURlogic Clean is particularly well suited for cleaning of Wurth PURlogic foam guns. • The can is supplied with an additional spray head for exterior cleaning of foam guns and other surfaces as well as the threaded top to directly clean the insides of the application guns. • Also suitable for use on some competitors guns. • Wide range of applications. • Due to the good compatibility of the cleaning compound, PU foam residue can be removed from various different surfaces, such as hard PVC, bright aluminium, glass and stone or ceramic materials. This information is only intended as a recommendation based on our own experience. The user should always perform his own preliminary testing. Contents Art. No. Pack Qty. 500ml 0892 160 1/12 Caution: Always perform a preliminary test with regard to the compatibility with the surface. Do not use on film-coated plastics, types of anodized aluminium and protective paint, as well as enamels, varnishes and similar surface protection. Stone and ceramic materials should have a sealed surface and not be porous or absorbent. Read the safety data sheet and instructions for use prior to application! Partner Products: PURlogic Top Foam PURlogic Xpress Application Gun