Web Catalogue update October 2019

05 3121 UNDERBODY PROTECTION Bitumen-based coating mass, cannot be painted over, contains solvents. With long-term protection and anti-drone effect. Resistant to sprayed water and saltwater, weak acids and bases. Colour Contents Art. No. Pack Qty. Black 1000ml 0892 072 12 Areas of application: For repair and protection of areas out of view which do not need to be painted over. Highly suitable as an external anti-drone mass for wheel wells, underbodies etc. Application: Shake can well before use. The application surface must be dry and free of rust, dirt and grease. Optimum spraying distance is 30 cm. Allow the product to dry between coatings in case of thicker coatings. Working pressure: 3 - 6 bar. Note: Do not spray on joints, engines, transmission and brake systems. NZ. pub. 09/16 © UNDERBODY SEAL SPRAY Synthetic rubber and plastic-based coating compound for protecting vehicle underbodies. Fast drying. • Reduced drying time (vehicle can be driven away after approximately 3 hours in case of air drying). • Suitable for oven drying up to 60 o C. Suitable for painting over. • 500ml (spray can) can be painted over after 3 hours with all standard painting systems (Follow manufacturer‘s instructions.). Excellent adhesion performance. • High abrasive resistance . Permanently elastic. • Active stone chip protection. Anti-drone effect. • Prevents noises and vibrations. Temperature-resistant. Working pressure: Max 3 bar. Optimum spraying distance is 30 cm. The best spraying results are achieved at a processing temperature of 15 - 25 o C. Chemical Basis Synthetic Resin Dispersion Density 0.899 g/cm 3 Max. temperature resistance -20 o C to 70 o C Shelf Life 12 Months Description Colour Content in ml Art. No. Stoneguard Aerosol Spray Black 500 0892 071