Web Catalogue update October 2019

05 3031 NZ pub. 08/14 © CAVITY WAX For repairs and long-lasting protection. Excellent creeping behaviour. Even hard-to-reach seams are effectively protected. Water-displacing effect. Moisture is subverted and displaced. High heat-resistance and good flexibility in the cold. Application: Shake can well before use. Thinly apply cavity wax using the pressurised gun and the corresponding tube. Apply spray directly or with the tube, depending on the area of use. Areas of Application: For long-lasting protection of areas in vehicle body cavities prone to corrosion. Used for subsequent treatment of existing seals and for restoring corrosion protection after an accident repair. Note: The material temperature should be 18 o C to 30 o C. Recommended dry layer thickness: 2 - 3 spray passes. We recommend two applications for classic cars. Ventilate cavities well after processing. Colour Contents Art. No. Pack Qty. Transparent 1000ml 0892 082 1/12 Transparent 500ml 0892 082 500 Partner Products: Tube, 600mm for Art. No. 0892 082 500 Art. No. 0891 081 This information is only a recommendation based on our experience. Preliminary testing required! While using the product, both the technical data sheet and the specifications of the applicable regulations are to be complied with. Aggregate State Fluid Colour Transparent Smell Characteristic Relative density at 20 o C 0.9 g/ml Water-soluble No Viscosity at 23 o C (Rheomat) Approx. 30 mPas Solid particle contents Approx. 55 % Pass-through time DIN 4 mm / 23 o C Approx. 18 s Flash Point (DIN EN 22719) 40 o C Shelf Life From 10 o C to 30 o C; 36 months (aerosol) / 24 months (liquid) Technical Data: