Web Catalogue update October 2019

CAR BODY SEALING TAPE / CAR BODY SEALING STRIP 05 3001 NZ. pub. 08/14 © Very good adhesive properties. • The tape offers very good adhesion as well as permanent bonding on various different surfaces, e.g. metal, plastic, wood, stone, etc. (see processing notes). Good UV, weather and water resistance. • Also suitable for outdoor use, resistant to rain and other weather influences (not for use in submerged conditions). Resistant to ageing and high temperatures. • Provided the tape is used correctly, adhesion and sealing is assured over a number of years. • Also suitable for high-temperature applications, for example, sealing of car bodies. Steam diffusion layer. • The sealing tape or round strip enables water-tight sealing and prevents penetration of moisture into the car body. Other Features: • Noise and vibration damping. • Self-fusing. • Free of solvents and silicone. • Immediately ready for use. Permanently plastic, self-adhesive sealing tape or round strip for sealing of overlapping car body panels. Design Colour Width mm Thickness mm Length mm Art. No. Pack Qty. Car Body Sealing Tape Grey 20 2 26 (3x6.5) 0890 100 030 1/4 Car Body Round Sealing Strip Black Ø 10 10 (5x2) 0890 100 032 Areas of Application: • Universal use for sealing of overlaps and screw connections in the automotive industry, container and motor home construction, for example: • Between fender and body. • At brake and rear lights (particularly round sealing strip). • At trim parts and sunroofs. • Also suitable for general sealing jobs to protect against dust, moisture and vibrations in electrical, machinery and construction applications as well as heating, ventilating and air conditioning, for example, between screw-connected parts, in seams, joints, housings of all types and pipe lead-throughs. Instruction for Use: • The surfaces to be sealed must be dry, stable and free from grease and dust. • The application temperature must not be below 5°C. • The car body sealing tape or round sealing strip must be pressed down carefully against the surface. Press the sealing surfaces together firmly to achieve an effective seal. • Butyl has a tendency towards “cold flow” (flow property of the tape). Therefore, butyl products should always be attached mechanically, i.e. with screwing components together or use of a contact profile. • Applying excessive pressure to the profile will cause “squeezing out” of the sealing compound. Never compress Butyl products to their zero point (use washer as spacer). Material Base Butyl rubber Fire Protection Class B2 Application Temperature -5°C to 40°C Temperature Stability -30°C to 100°C Shelf Life (at approx. 20°C and 50% humidity) 24 months (store dry, lying flat and dust-free) Specifications: This information is only a recommendation based on our experience. Preliminary testing required! While using the product, both the technical data sheet and the specifications of the applicable regulations are to be complied with.