Web Catalogue update October 2019

05 1501 DOS SYSTEM What is the DOS System? A revolutionary system for one handed application of sealants. The benefits of the DOS System Accessibility : - Bottles stored in the practical storage holder mean the right product is easy to find and always within reach. - The storage holder may be set up anywhere, such as a work bench, on the wall or a tool trolley. Practicality : - The seven most important sealants for every work shop are included in the set. - The storage holder may be filled according to each customer’s personal needs. E ase of Use : - The revolutionary "dosage lid" allows accurate application of product with no overflow. - Each bottle can be operated easily with one hand. - Because the bottles are stored lid-down in the holder, the product is always ready to use. - Ensures that each bottle is completely used up. Product Data Hydraulic Sealant Thread Locker High Strength Thread Locker Medium Strength Bearing Retainer High Strength Flange Sealant Green Flange Sealant Orange Pipe Sealant Motor Sealant Art. No. 0893 545 050 Art. No. 0893 270 050 Art. No. 0893 243 050 Art. No. 0893 603 050 Art. No. 0893 573 050 Art. No. 0893 574 050 Art. No. 0893 577 050 Art. No. 0893 260 100 For sealing pneumatic and hydraulic connections under high loads up to the bursting pressure of the hose. For securing and sealing of screws, bolts, nuts, threaded inserts and threaded plugs. Restricts loosening by impact or vibration. For securing bearings, gear wheels, bolts, screws, shafts and auxiliary joints. Prevents rattles due to load change. For sealing precision machined flanges and surfaces with gaps to max. 0.3mm. Replacement for solid gaskets. For sealing precision machined flanges and surfaces with gaps to max. 0.5mm. Replacement for solid gaskets. Gas & fluid proof sealant for all pipe threads and fittings up to R3”. Motor Sealant is a transparent, red, viscous fluid sealant which bonds to all metals. Suitable for all engine gasket surfaces since no residue remains. All sealed surfaces are sealed against thermal, chemical and mechanical stress. Sealed surfaces can be easily separated. Resistant to petrol, diesel, oil, grease, water, steam, frost and all normal chemicals. *Only suitable for use on engine components. Description Art. No. Pack Qty. DOS Sealants System 0998 893 964 1 ChemicalBasis: Colour: Viscosity inmPas: Stability in storage: Full strengthat25ºC: Break looseresistance: Operatingpressure: Tensile strength: Temp. resistance: Max.gapbridging: Max. thread joint: Max.gluegap: Instructions foruse: DOS SYSTEM APPLICATION GUIDE RESISTANCE TABLE FORDOS-SYSTEM •Kerosene •Alcohols • FormicAcids • Ethelacetate •Acetone • Petrol •Alkaline Solutions • Phosphoric acid (10%) •Diesel • Jet Fuel •AviationSpirit • Frost protection •Gear oil •Heating oil •Hydraulic oil • Solvents (chlorinated) • Engine oil •Oils • Xilene • Steam •Coolants • Brake Fluid Product Application: Properties: Motor Sealant Art.No. 0893260100 Thread Locker HighStrength Art.No. 0893270050 Thread Locker Medium Strength Art.No. 0893243050 Bearing Retainer HighStrength Art.No. 0893603050 Flange Sealant Green Art.No. 0893573050 Flange Sealant Orange Art.No. 0893574050 Pipe Sealant Art.No. 0893577050 Hydraulic Sealant Art.No. 0893545050 Motor Sealant is a transparent, red, viscous fluid sealantwhich bonds to allmetals. Suitable for all engine gasket surfaces since no residue remains. All sealed surfaces are sealed against thermal, chemical andmechanical stress. Sealed surfaces can be easily separated. Resistant to petrol, diesel, oil, grease,water, steam, frost and all normal chemicals. *Only suitable for use on engine components. For securing and sealing of screws, bolts, nuts, threaded inserts and threaded plugs. Restricts loosening by impact or vibration. For securing bearings, gearwheels, bolts, screws, shafts and auxiliary joints. Prevents rattles due to load change. For sealing precision machined flanges and surfaceswith gaps tomax.0.3mm. Replacement for solid gaskets. For sealing precision machined flanges and surfaceswith gaps tomax.0.5mm. Replacement for solid gaskets. Gas& fluid proof sealant for all pipe threads and fittings up to R3”. Epoxy resin Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Transparent Red Green Fluorescent Blue Green FluorescentGreen FluorescentOrange Fluorescent Yellow Violet 5,000–13,200 400 -600 5,000 -7,000 100 -150 40,000 -60,000 35,000 -100,000 20,000 -80,000 1,500 -2,000 1 year 1 year 1 year 1 year 1 year 1 year 1 year 1 year +80 o C=6hrs,+180 o C=5hrs 6 hours 3 hours 6 -24 hours 6 -24 hours 6 -24 hours 3 hours 12 -24 hours – >30Nm 21Nm – 8 -12Nm 17 -22Nm 15 -20Nm 2-3Nm 700 bar (10,290psi) – – – – – 300 bar (4410psi) 200 bar (2940psi) – – – – 2 -4N/mm2 8 -10N/mm2 – – -50 o C to+280 o C -55 o C to+150 o C -55 o C to+150 o C -55 o C to+150 o C -55 o C to+150 o C -55 o C to+150 o C -55 o C to+150 o C -55 o C to+150 o C approx2mm up to0.15mm up to0.25mm up to0.15mm up to0.3mm up to0.5mm 0.5mm 0.15mm – M20 M36 M12 – – R3” (M80) R3/4” approx2mm – – – 0.3mm 0.5mm – – Cleananddry the surfaces tobe sealed. Applya thin layerof the materialonone sideand leave for5-20min toair, then join two surfaces. Thermal hardeningpossible from+60 o C. It is relatively easy to separate the joined parts ifnecessary. Universal product for all threads and cylindrical partswhich would not normally be released again. Can be releasedwith special tools and/or heat. A commonly used product, providing excellent protection against oil,water and heat. Will harden even at very low temperature. Can be releasedwith normal tools. Universal product for heavily stressed joints. High tear-resistance. Can be used in small spaces between joined surfaces. Excellent resistance to media. Particularly suitable where a good coverage is essential e.g.with complicated castings, narrow links and smooth surfaces. An easily detached low adhesion joint, which is particularly flexible. Particularly suitable where a good coverage is essential e.g.with complicated castings, narrow links and smooth surfaces. An easily detached low adhesion joint, which is particularly flexible. Highly suitable for larger and rougher machined surfaces. Excellent resistance to chemicals, gas, liquids, fuels and hydraulic fluids. Motor Sealant Thread Locker Bearing Retainer Flange Sealant Flange Sealant Pipe Sealant Hydraulic Sealant For sealing pneumatic and hydraulic connections under high loads up to the bursting pressure of the hose. Excellent resistance to chemicals, gas, liquids, fuels and hydraulic fluids. Fast curing even at low temperatures. Can be applied on slightly oily surfaces, no need for time consumingdegreasing of threads. For securing and sealing of screws, bolts, nuts, threaded inserts and threaded plugs. Restricts loosening by impact or vibration. Clean add dry threads, applying a small amount of Thread Lock. Tighten to specifications. Clean and dry all surfaces to be sealedwith a suitable solvent (ie. BrakeCleaner -08901087). Apply a thin layer of Sealant to one side only and assemble parts immediately. Apply a small amount ofHydraulic Sealant to threads and tighten to specifications. Thread Locker ArticleNo.0893964001/ JobNo.391110 - AUS/Revised/Reprint: 2/11 WurthAustraliaPty. Ltd. - T:1300 657765 -Contactus today A product that adheres tomost surfaces. It is permanently pliable and resistant to vibration.As the product only has to applied thinly to one side it is very economical. It can also be used as a replacement for solid gaskets. Art. No. 0998 893 893 NZ. pub. 04/16 ©