Web Catalogue update October 2019

ACRYLIC SEALANT 05 0581 NZ. pub. 08/14 © For sealing joints indoors with low movement absorption. Can be painted/plastered over * Outstanding adhesion of common paints/plasters on sealant. Broad range of applications Suitable for indoor joints subject to low expansion. Additional advantages: Silicone-free Resistant to ageing, weather and UV. Building Material Class B2 in accordance with DIN 4102. Note: * Due to the multitude of paint and lacquer formulas available, we recommend that you always carry out preliminary testing in order to rule out interactions. Caution: Sealant joints that have been fully painted over tend to crack when movement occurs in the joint, as the applied paint is generally less elastic than the sealant. Use: Please comply with the overview sheet entitled "General Notes on Application for Sealants". Partner Product: Cartridge Gun Art. No. 0891 … .. Areas of application: For sealing and connection joints with low compression and expansion loading indoors, e.g. for sealing cracks in masonry, plaster or concrete. Typical application surfaces: With primer: Clinker, brick, wood, concrete, aerated concrete, gypsum, gypsum plasterboard, plaster, chalky sandstone Note: The setting speed is dependent on the application temperature, the weather and the surface moisture. It is greatly delayed in cold, damp weather. Description/Container Colour Content in mL Art. No. Pack Qty. Cartridge white 310 0892 165 24 The color information can differ from the original for printing-related reasons! With this information, we want to advise you to the best of our knowledge based on our tests and experience. Preliminary testing required! For further information, see the Technical Data Sheet. Technical data: Raw material base Acrylic resin dispersion Primer On absorbent or porous surfaces. Mixing ratio of acrylic sealant and water 1:1 to 1:5 Max. take-up of continuous movement 5% of joint width Skin formation time Approx. 10 min. at 23°C and 50% rel. humidity Curing speed Approx. 1 mm/day; at 23°C, 50% rel. humidity Temperature-resistance –20°C to 80°C Application temperature +5°C to 40°C Can be painted over * Yes, preliminary testing required Compatibility with paint Yes, preliminary testing required Contains fungicide No Shore A hardness Approx. 50 Density 1.6 g/cm³ Elongation at failure with 2mm film 250%