Web Catalogue update October 2019

P10 P20 P30 P55 Product Quick-Grinding Paste Plus Art. No. 0893 150 010 High-Gloss Polish Plus Art. No. 0893 150 020/025 Anti-Hologram Polish Plus Art. No. 0893 150 030 Combination Polish Plus Art. No. 0893 150 055/058 Area of application Painters Detailers Painters Detailers Painters Detailers Detailers Area of use Very abrasive high-shine polish for the quick removal of imperfections in fresh repair and hardened finishing paints and for polishing out stubborn signs of use on used paints. Sanding marks from a grain of P1500 can be removed effortlessly. Medium abrasive high-shine polish for efficient paint preparation, removal of signs of sanding and scratches from used paints and for the removal of imperfections on hardened repair finishing paints. Sanding marks from a grain of P2000 can be removed effortlessly. Anti-hologram high-shine polish for lasting elimination of streaks and holograms on dark vehicle paints and for efficient removal of fine signs of sanding or slight paint imperfections on used and new car paints. Sanding marks from a grain of P3000 can be removed effortlessly. Especially suitable as paint finishing paste if the paint was treated with coarser pastes beforehand. P55 Combination Polish was developed especially for use on old and new paints. P55 enables preparation and sealing of the paint in a single step. The polish is characterized by its excellent removal rate and high shine when buffed. Dust inclusions, sanding marks, orange peeling, paint irritations Signs of sanding and scratches, detailing used vehicles Elimination of holograms, carwash scratches Signs of sanding and scratches Restoration of used vehicles Application Shake well before use. Moisten the surfaces of the selected polishing wheel evenly with the paste and apply a small quantity on the surface to be polished. Lay the polishing pad evenly on the area and start the machine. Using the appropriate amount of pressure and a speed of 1,500 – 2,000 rpm, process the surface until the paint imperfections etc. have been removed. Proceed in sections. Shake well before use. Moisten the surfaces of the selected polishing wheel evenly with the paste and apply a small quantity on the surface to be polished. Lay the polishing pad evenly on the area and start the machine. Using the appropriate amount of pressure and a speed of 1,500 – 2,000 rpm, process the surface until the paint imperfections etc. have been removed. Proceed in sections. Shake well before use. Moisten the surfaces of the selected polishing wheel evenly with the paste and apply a small quantity on the surface to be polished. Lay the polishing pad evenly on the area and start the machine. Using the appropriate amount of pressure and a speed of 1,500 – 2,000 rpm, process the surface until the paint imperfections etc. have been removed. Proceed in sections. Moisten the surface of the selected polishing wheel evenly with the paste and apply a small quantity on the surface to be polished. Lay the polishing pad evenly on the area and start the machine. Using the appropriate amount of pressure & a speed of 1,500 – 2,000 rpm, process the surface until the paint imperfections etc. have been removed. Proceed in sections. Finish Remove polish residue with a microfibre cloth. Remove any remaining streaks with P30 Anti-Hologram Polish Plus. Remove polish residue with a microfiber cloth. Remove polish residue with a microfiber cloth. Remove polish residue with a microfiber cloth. Processing Mechanical Mechanical Manual/Mechanical Manual/Mechanical Suitable polishing pad ● ● ▯ ▯ ● ● APPLICATION OVERVIEW OF PAINT FINISH/POLISHES 04 4501 NZ. pub. 09/16 © ▯ Wave polishing pad ▯ Orange polishing pad ▯ Blue polishing pad Black lambskin