Web Catalogue update October 2019

ROST OFF BLUE ICE High-grade rust remover with cracking effect and visual cold indicator. • Cracking effect. • By cooling the material surface down to -45°C, micro-fine cracks occur in the corrosion layer at the connection points. These "crack open" the rust, ensuring better penetration of the active agent. • Visual cold indicator. • When cooled to a minimum temperature of -5°C, the sprayed area turns blue. The processing temperature is achieved. • Optimum rust removal • Rust is quickly penetrated and loosens seized screws. • Heavily rusted screw connections are loosened without damaging them. • Optimum protection against corrosion due to corrosion protection additives. • Provides lasting protection against further corrosion. • Resin- and acid-free. • Silicone-free. • Compatible with rubber and seals. 04 1068 NZ. pub. 09/15 © Lubricant system: Oil      Grease      Paste      Dry lubricant      Corrosion protection • This information should only be seen as containing recommendations based on our experience. If necessary check material compatibility in an inconspicuous place. Description Contents Art. No. Pack Qty. Rost Off Ice 400ml 0893 241 1/12 How the crack effect happens. 1. Bolt is sprayed from a short distance. 2. The surface material of the screw cools down to -45 o C. This reduces the dia- meter of the bolt and turns the sprayed area blue. 3. Microscopic cracks appear in the layer of corrosion between the turns of the thread. The corrosive compound between the bolt and the nut is thus loosened, allowing the active sub- stance to rapidly penetrate the rust. Layer of corrosion Active substance Application: Remove as much of the coarse soiling as possible. Shake can before use. Spray the jammed parts (bolts) from an extremely short distance until sprayed area turns blue. With stubborn parts, repeart the process. Areas of Application: For destruction-free loosening of extremely rusty and oxidised screw connections on passenger cars, trucks, agricultural and construction machinery, assemblies and devices. Technical Data Base Petroleum Colour Pale yellow, transparent Operating temperature range -10°C to 40°C Flashing point of active ingredient -80°C Conditions for viscosity of oil basis 40°C